Cylinder volume
Cylinder Volume Calculator Circumference
Enter a radius or diameter and a height to get an instant, accurate cylinder volume in any unit — with the formula and every step shown.
Getting the volume of a cylinder comes down to two measurements: how wide it is across, and how tall it is. This cylinder volume calculator circumference does the arithmetic for you — type in a radius or diameter and a height, choose your units, and the answer appears with the working laid out underneath.
The reason this shape earns a dedicated tool is that its two measurements are easy to get wrong. Confusing radius with diameter doubles your answer; mixing inches with centimetres throws it out completely. Keeping each measurement labelled, and letting the tool convert, removes both traps before they cost you.
How to work it out
- Measure across the circular end — the diameter or radius.
- If you measured the diameter, halve it to get the radius r.
- Square the radius and multiply by π to get the base area.
- Multiply the base area by the height h: V = π r² h.
- Convert the result into your preferred unit above.
Getting an accurate measurement
If you can only reach the top, measure the diameter across the opening and halve it. Keep every measurement in the same system, and let the tool convert between units for you.
The maths in one line
The volume of a cylinder is:
V = π r² hA worked example
Worked example. Take a cylinder with a diameter of 10 cm (so a radius of 5 cm) and a height of 25 cm. The base area is π × 5² = 78.54 cm², and multiplying by the height gives a volume of about 1.96 litres (1,963 cm³ · 0.52 US gallons).
For anything that holds liquid, measure the inside of the cylinder — the wall takes up space that the contents cannot.
Conversions use standard factors: 1 US gallon = 231 in³, 1 Imperial gallon = 4.54609 L, 1 litre = 1000 cm³.
Once the result is in
The figure above is usually the start, not the finish. These are the questions that tend to come next, answered here so you do not have to run another search:
What if I have the diameter, not the radius?
Toggle the base input to diameter and the tool halves it for you. There is also a circumference option for when that is all you were able to measure.
How do I find a missing dimension?
If you know the volume you need and one measurement, the reverse-solver returns the height, radius or diameter that matches it.
Can I get the weight too?
Tick estimate weight, pick a material, and the calculator multiplies volume by density to show the mass in kilograms and pounds.
What will the volume be in gallons or litres?
You do not have to choose up front. The result lists litres, US gallons, Imperial gallons, cubic feet and more together, so you can switch the main unit whenever you like.
Where people use this
A few of the jobs it gets used for:
- Checking a geometry homework answer
- Sizing a barrel, drum or planter
- Estimating pipe or duct volume
- Planning a DIY water feature
Common mistakes to avoid
Two things trip people up: squaring the wrong number, and forgetting that the answer is cubic. If a result looks four times too big or too small, you have probably swapped radius and diameter somewhere, so it is always worth re-reading the measurement you are least sure of. It also helps to glance at the equivalent units; if the litre and gallon figures are both off by the same factor, the input is the culprit, not the maths.
Getting the number in the unit you need
One number, many units. Whatever you enter, the result lists the same volume as litres, US gallons, Imperial gallons, millilitres, cubic centimetres, cubic inches, cubic feet, cubic yards and cubic metres at the same time. You almost never have to convert by hand: read the figure in the unit your job uses and copy any of the others straight from the breakdown. If you need a shareable version, the copy-link button preserves your exact inputs so a colleague opens the page with the same calculation already filled in.
Related things you might need
Once you have your answer you may also want to work in gallons litres & liters volume formula. These related calculators pick up where this one leaves off:
The bottom line: with the radius or diameter and the height, the volume follows immediately, and the breakdown lets you hand the same number to anyone in the unit they prefer. Measure inside dimensions for anything that holds liquid, leave a little headspace at the top of a real container, and treat the geometric figure as a clean maximum rather than the final word on usable capacity.
Frequently asked questions
Does this work for a tank or a pipe?
What is the formula for the volume of a cylinder?
V = π r² h — the area of the circular base (π r²) multiplied by the height (h). If you have the diameter instead of the radius, halve it first: r = d ÷ 2.