Volume formula
What Is the Volume Formula of a Cylinder
The cylinder volume formula, what each symbol means, and a worked example you can copy — plus a live calculator to check your own numbers.
The volume of a right circular cylinder is V = π r² h: the area of the circular base, π r², multiplied by the height. This page explains where that comes from, works through an example, and gives you a live tool so you can check any set of numbers against the what is the volume formula of a cylinder.
What makes this worth truly understanding, rather than just plugging into, is that every related shape is a small variation on it — halve it, subtract an inner tube, swap the circle for an oval — so learning the one formula quietly unlocks all of them.
How the calculation works
- Measure across the circular end — the diameter or radius.
- If you measured the diameter, halve it to get the radius r.
- Square the radius and multiply by π to get the base area.
- Multiply the base area by the height h: V = π r² h.
- Convert the result into your preferred unit above.
Getting an accurate measurement
If you can only reach the top, measure the diameter across the opening and halve it. Keep every measurement in the same system, and let the tool convert between units for you.
The maths in one line
The volume of a cylinder is:
V = π r² hA worked example
Worked example. Take a cylinder with a diameter of 10 cm (so a radius of 5 cm) and a height of 25 cm. The base area is π × 5² = 78.54 cm², and multiplying by the height gives a volume of about 1.96 litres (1,963 cm³ · 0.52 US gallons).
For anything that holds liquid, measure the inside of the cylinder — the wall takes up space that the contents cannot.
Conversions use standard factors: 1 US gallon = 231 in³, 1 Imperial gallon = 4.54609 L, 1 litre = 1000 cm³.
Once the result is in
Most jobs need one or two more things once the volume lands. The common follow-ups, with the numbers you need, are below:
How does the diameter version work?
If you are given the diameter, use V = pi (d/2)^2 h, which is the same as pi d^2 h divided by 4. Halving the diameter first is usually the cleaner route, and it is what the calculator does automatically.
How do I rearrange it to find the height?
Divide the volume by the base area: h = V divided by (pi r^2). To find a radius from a known volume and height, use r = the square root of V divided by (pi h). The reverse-solver does both for you.
What is the surface area, while I am here?
The total surface area of a closed cylinder is 2 pi r^2 + 2 pi r h — the two circular ends plus the curved side. It is a different quantity from volume, but it uses the very same two measurements.
Why is the radius squared?
Because the base is a circle, and a circle's area already needs r squared. Multiplying by the height then stretches that flat area into a solid, which is why the final unit is always cubic.
Common uses
People reach for this in a range of situations:
- Checking a geometry homework answer
- Sizing a barrel, drum or planter
- Estimating pipe or duct volume
- Planning a DIY water feature
Where people go wrong
Two things trip people up: squaring the wrong number, and forgetting that the answer is cubic. If a result looks four times too big or too small, you have probably swapped radius and diameter somewhere, so it is always worth re-reading the measurement you are least sure of. It also helps to glance at the equivalent units; if the litre and gallon figures are both off by the same factor, the input is the culprit, not the maths.
Getting the number in the unit you need
Showing every unit at once is about speed and safety: you see the answer in litres, gallons and cubic feet side by side, so there is no chance of applying the wrong conversion factor. Change the output unit at the top to make any of them the headline figure, switch the precision to exact if you want the value in terms of pi, and use copy-result to paste a tidy summary wherever you need it.
What to work out next
Once you have your answer you may also want to work in cylinder volume gallons litres & liters. These related calculators pick up where this one leaves off:
In short: measure the width and the height, keep them in the same unit, and the tool turns them into a volume you can read in litres, gallons, cubic feet or anything else, with the working shown so you can trust it. If a result ever looks off, re-enter the measurement you are least sure of, or switch to the diameter input and let the tool halve it for you, which catches the most common error before it matters.
Questions people ask
What units can I use?
Is the volume of a cylinder squared or cubed?
Does this work for a tank or a pipe?
What is the cylinder volume formula?
V = π r² h. Using diameter, it becomes V = π (d/2)² h, which is the same as V = π d² h ÷ 4.