Volume formula
Formula for Calculating the Volume of a Cylinder
The cylinder volume formula, what each symbol means, and a worked example you can copy — plus a live calculator to check your own numbers.
The volume of a right circular cylinder is V = π r² h: the area of the circular base, π r², multiplied by the height. This page explains where that comes from, works through an example, and gives you a live tool so you can check any set of numbers against the formula for calculating the volume of a cylinder.
What makes this worth truly understanding, rather than just plugging into, is that every related shape is a small variation on it — halve it, subtract an inner tube, swap the circle for an oval — so learning the one formula quietly unlocks all of them.
The formula behind it
The volume of a cylinder is:
V = π r² hA worked example
Worked example. Take a cylinder with a diameter of 10 cm (so a radius of 5 cm) and a height of 25 cm. The base area is π × 5² = 78.54 cm², and multiplying by the height gives a volume of about 1.96 litres (1,963 cm³ · 0.52 US gallons).
For anything that holds liquid, measure the inside of the cylinder — the wall takes up space that the contents cannot.
Conversions use standard factors: 1 US gallon = 231 in³, 1 Imperial gallon = 4.54609 L, 1 litre = 1000 cm³.
Using the calculator
- Measure across the circular end — the diameter or radius.
- If you measured the diameter, halve it to get the radius r.
- Square the radius and multiply by π to get the base area.
- Multiply the base area by the height h: V = π r² h.
- Convert the result into your preferred unit above.
Getting an accurate measurement
If you can only reach the top, measure the diameter across the opening and halve it. Keep every measurement in the same system, and let the tool convert between units for you.
Follow-on questions, answered
Most jobs need one or two more things once the volume lands. The common follow-ups, with the numbers you need, are below:
How do I rearrange it to find the height?
Divide the volume by the base area: h = V divided by (pi r^2). To find a radius from a known volume and height, use r = the square root of V divided by (pi h). The reverse-solver does both for you.
What is the surface area, while I am here?
The total surface area of a closed cylinder is 2 pi r^2 + 2 pi r h — the two circular ends plus the curved side. It is a different quantity from volume, but it uses the very same two measurements.
Why is the radius squared?
Because the base is a circle, and a circle's area already needs r squared. Multiplying by the height then stretches that flat area into a solid, which is why the final unit is always cubic.
How does the diameter version work?
If you are given the diameter, use V = pi (d/2)^2 h, which is the same as pi d^2 h divided by 4. Halving the diameter first is usually the cleaner route, and it is what the calculator does automatically.
Common mistakes to avoid
The commonest slip is using the diameter where the formula wants the radius, which on its own quadruples the base area. Close behind is mixing units, such as a radius in centimetres with a height in metres. Keep every length in the same unit, or let the tool convert, and double-check whether you measured to the centre or across the whole width. When a figure looks surprising, that width measurement is almost always where the problem is hiding, so re-read it first.
One result, every unit
Because volume units are where most errors creep in, the tool does the converting for you. Enter your measurements once and every common unit appears together, from millilitres up to cubic metres and across to US and Imperial gallons. Pick whichever the task calls for and lift the rest from the list; nothing needs a second calculation. The result also updates live as you change a measurement, so you can compare two sizes quickly without starting over.
What to work out next
Once you have your answer you may also want to work in cylinder volume gallons litres & liters. These related calculators pick up where this one leaves off:
When this comes in handy
A few of the jobs it gets used for:
- Checking a geometry homework answer
- Sizing a barrel, drum or planter
- Estimating pipe or duct volume
- Planning a DIY water feature
The bottom line: with the radius or diameter and the height, the volume follows immediately, and the breakdown lets you hand the same number to anyone in the unit they prefer. Measure inside dimensions for anything that holds liquid, leave a little headspace at the top of a real container, and treat the geometric figure as a clean maximum rather than the final word on usable capacity.
Frequently asked questions
What units can I use?
Is the volume of a cylinder squared or cubed?
Does this work for a tank or a pipe?
What is the cylinder volume formula?
V = π r² h. Using diameter, it becomes V = π (d/2)² h, which is the same as V = π d² h ÷ 4.