Cubic feet
Calculate Cubic Feet of Cylinder
Work out the cubic feet inside any cylinder from feet or inches, with the conversion to gallons and litres alongside.
Cubic feet is the unit of choice for larger cylinders — storage tanks, silos, concrete forms — and this calculate cubic feet of cylinder gives it to you directly. Measure in feet (or inches, and let the tool convert), and read the ft³ result with gallons alongside.
Cubic feet is the working unit for anything large and dry — silo capacity, duct sizing, the concrete in a round pier. It sits neatly between inches and yards, so most builders measure in feet, calculate in cubic feet, and only convert to yards or gallons at the very end.
The maths in one line
The volume of a cylinder is:
V = π r² hA worked example
Worked example. Take a cylinder with a diameter of 1.5 ft (so a radius of 0.75 ft) and a height of 5 ft. The base area is π × 0.75² = 1.77 ft², and multiplying by the height gives a volume of about 8.84 cubic feet (66.1 US gallons · 250 litres).
| From | To | Multiply by |
|---|---|---|
| cm³ | litres | 0.001 |
| litres | m³ | 0.001 |
| in³ | US gallons | ÷ 231 |
| ft³ | US gallons | 7.4805 |
| ft³ | litres | 28.3168 |
For anything that holds liquid, measure the inside of the cylinder — the wall takes up space that the contents cannot.
Conversions use standard factors: 1 US gallon = 231 in³, 1 Imperial gallon = 4.54609 L, 1 litre = 1000 cm³.
Using the calculator
- Measure across the circular end — the diameter or radius.
- If you measured the diameter, halve it to get the radius r.
- Square the radius and multiply by π to get the base area.
- Multiply the base area by the height h: V = π r² h.
- Convert the result into your preferred unit above.
Getting an accurate measurement
If you can only reach the top, measure the diameter across the opening and halve it. Keep every measurement in the same system, and let the tool convert between units for you.
After you have your answer
To save you a second search, here are the related answers people most often want straight after this calculation:
What is it in litres or cubic metres?
One cubic foot is about 28.32 litres, or 0.0283 cubic metres, and both appear alongside the cubic-foot result for metric jobs.
Do I measure in feet or inches?
Either. Enter inches on each field if that is how you measured, and the tool converts to feet before giving you the cubic-foot answer.
How many gallons is that?
One cubic foot holds about 7.48 US gallons, and the gallon value is shown in the breakdown, so a cubic-foot figure converts into a fill quantity instantly.
How much concrete should I order?
Suppliers sell by the cubic yard, and 27 cubic feet make one cubic yard. Work in cubic feet here, then divide by 27, or use the cubic-yards mode directly for the order.
What to watch out for
The commonest slip is using the diameter where the formula wants the radius, which on its own quadruples the base area. Close behind is mixing units, such as a radius in centimetres with a height in metres. Keep every length in the same unit, or let the tool convert, and double-check whether you measured to the centre or across the whole width. When a figure looks surprising, that width measurement is almost always where the problem is hiding, so re-read it first.
One result, every unit
Showing every unit at once is about speed and safety: you see the answer in litres, gallons and cubic feet side by side, so there is no chance of applying the wrong conversion factor. Change the output unit at the top to make any of them the headline figure, switch the precision to exact if you want the value in terms of pi, and use copy-result to paste a tidy summary wherever you need it.
What to work out next
Once you have your answer you may also want to work in gallons cubic yards tank capacity. These related calculators pick up where this one leaves off:
When this comes in handy
A few of the jobs it gets used for:
- Ordering concrete for a round column or footing
- Sizing a silo or bulk storage cylinder
- Estimating air volume in a round duct
To sum up, the whole job is two measurements and one formula. Enter them above, pick your unit, and you have an accurate figure plus every equivalent unit beside it. Keep a copy with the copy-result button, save the shareable link if someone else needs the same numbers, and use the history panel to compare a few options without starting from scratch.
Good to know
Does this work for a tank or a pipe?
What is the formula for the volume of a cylinder?
V = π r² h — the area of the circular base (π r²) multiplied by the height (h). If you have the diameter instead of the radius, halve it first: r = d ÷ 2.