Oblique cylinder
Oblique Cylinder Volume Calculator
A leaning cylinder has the same volume as an upright one — as long as you use the perpendicular height, not the slant.
An oblique cylinder leans to one side, but here is the useful fact this oblique cylinder volume calculator is built on: its volume is identical to an upright cylinder with the same base and the same perpendicular height. The slant does not change the volume.
Cylinders turn up everywhere once you start noticing them — a tin of beans, a scaffold pole, a rainwater barrel, the barrel of a pump. Because they all share the same simple geometry, one calculation covers the lot, and the only thing that really changes from job to job is the unit you read the answer in.
How the calculation works
- Measure across the circular end — the diameter or radius.
- If you measured the diameter, halve it to get the radius r.
- Square the radius and multiply by π to get the base area.
- Multiply the base area by the height h: V = π r² h.
- Convert the result into your preferred unit above.
Getting an accurate measurement
Use the vertical (perpendicular) height, never the slanted edge. Keep every measurement in the same system, and let the tool convert between units for you.
The formula behind it
The volume of a cylinder is:
V = π r² h (perpendicular h)A worked example
Worked example. Take a cylinder with a diameter of 20 cm (so a radius of 10 cm) and a height of 40 cm. The base area is π × 10² = 314.16 cm², and multiplying by the height gives a volume of about 12.57 litres (12,566 cm³ · 3.32 US gallons).
Measure the perpendicular height — straight up between the two ends — not the longer slanted side, or the volume will come out too high.
Conversions use standard factors: 1 US gallon = 231 in³, 1 Imperial gallon = 4.54609 L, 1 litre = 1000 cm³.
Once the result is in
Most jobs need one or two more things once the volume lands. The common follow-ups, with the numbers you need, are below:
How do I find a missing dimension?
If you know the volume you need and one measurement, the reverse-solver returns the height, radius or diameter that matches it.
Can I get the weight too?
Tick estimate weight, pick a material, and the calculator multiplies volume by density to show the mass in kilograms and pounds.
What will the volume be in gallons or litres?
You do not have to choose up front. The result lists litres, US gallons, Imperial gallons, cubic feet and more together, so you can switch the main unit whenever you like.
What if I have the diameter, not the radius?
Toggle the base input to diameter and the tool halves it for you. There is also a circumference option for when that is all you were able to measure.
Where people use this
A few of the jobs it gets used for:
- Checking a geometry homework answer
- Sizing a barrel, drum or planter
- Estimating pipe or duct volume
- Planning a DIY water feature
Common mistakes to avoid
The commonest slip is using the diameter where the formula wants the radius, which on its own quadruples the base area. Close behind is mixing units, such as a radius in centimetres with a height in metres. Keep every length in the same unit, or let the tool convert, and double-check whether you measured to the centre or across the whole width. When a figure looks surprising, that width measurement is almost always where the problem is hiding, so re-read it first.
One result, every unit
One number, many units. Whatever you enter, the result lists the same volume as litres, US gallons, Imperial gallons, millilitres, cubic centimetres, cubic inches, cubic feet, cubic yards and cubic metres at the same time. You almost never have to convert by hand: read the figure in the unit your job uses and copy any of the others straight from the breakdown. If you need a shareable version, the copy-link button preserves your exact inputs so a colleague opens the page with the same calculation already filled in.
Related things you might need
Once you have your answer you may also want to work in cylinder volume volume formula elliptical cylinder. These related calculators pick up where this one leaves off:
To sum up, the whole job is two measurements and one formula. Enter them above, pick your unit, and you have an accurate figure plus every equivalent unit beside it. Keep a copy with the copy-result button, save the shareable link if someone else needs the same numbers, and use the history panel to compare a few options without starting from scratch.
Good to know
What units can I use?
Is the volume of a cylinder squared or cubed?
Does this work for a tank or a pipe?
How do you find the volume of an oblique cylinder?
V = π r² h with the perpendicular height. By Cavalieri's principle, a slanted cylinder has the same volume as an upright one with the same base and height.Do I use the slant height?
What is the formula for the volume of a cylinder?
V = π r² h — the area of the circular base (π r²) multiplied by the height (h). If you have the diameter instead of the radius, halve it first: r = d ÷ 2.