How to measure
How to Measure Volume in a Cylinder
Which measurements you actually need, where to take them, and the difference between inside and outside dimensions.
Before any formula, you need the right measurements. This guide, paired with the how to measure volume in a cylinder tool, shows exactly what to measure on a cylinder, where to take each reading, and why inside dimensions matter for anything that holds liquid.
The reason this shape earns a dedicated tool is that its two measurements are easy to get wrong. Confusing radius with diameter doubles your answer; mixing inches with centimetres throws it out completely. Keeping each measurement labelled, and letting the tool convert, removes both traps before they cost you.
Using the calculator
- Measure across the circular end — the diameter or radius.
- If you measured the diameter, halve it to get the radius r.
- Square the radius and multiply by π to get the base area.
- Multiply the base area by the height h: V = π r² h.
- Convert the result into your preferred unit above.
Getting an accurate measurement
If you can only reach the top, measure the diameter across the opening and halve it. Keep every measurement in the same system, and let the tool convert between units for you.
How the volume is worked out
The volume of a cylinder is:
V = π r² hA worked example
Worked example. Take a cylinder with a diameter of 15 cm (so a radius of 7.5 cm) and a height of 30 cm. The base area is π × 7.5² = 176.71 cm², and multiplying by the height gives a volume of about 5.30 litres (5,301 cm³ · 1.40 US gallons).
For anything that holds liquid, measure the inside of the cylinder — the wall takes up space that the contents cannot.
Conversions use standard factors: 1 US gallon = 231 in³, 1 Imperial gallon = 4.54609 L, 1 litre = 1000 cm³.
After you have your answer
To save you a second search, here are the related answers people most often want straight after this calculation:
What will the volume be in gallons or litres?
You do not have to choose up front. The result lists litres, US gallons, Imperial gallons, cubic feet and more together, so you can switch the main unit whenever you like.
What if I have the diameter, not the radius?
Toggle the base input to diameter and the tool halves it for you. There is also a circumference option for when that is all you were able to measure.
How do I find a missing dimension?
If you know the volume you need and one measurement, the reverse-solver returns the height, radius or diameter that matches it.
Can I get the weight too?
Tick estimate weight, pick a material, and the calculator multiplies volume by density to show the mass in kilograms and pounds.
When this comes in handy
People reach for this in a range of situations:
- Checking a geometry homework answer
- Sizing a barrel, drum or planter
- Estimating pipe or duct volume
- Planning a DIY water feature
Getting it right
Two things trip people up: squaring the wrong number, and forgetting that the answer is cubic. If a result looks four times too big or too small, you have probably swapped radius and diameter somewhere, so it is always worth re-reading the measurement you are least sure of. It also helps to glance at the equivalent units; if the litre and gallon figures are both off by the same factor, the input is the culprit, not the maths.
Reading and converting your result
One number, many units. Whatever you enter, the result lists the same volume as litres, US gallons, Imperial gallons, millilitres, cubic centimetres, cubic inches, cubic feet, cubic yards and cubic metres at the same time. You almost never have to convert by hand: read the figure in the unit your job uses and copy any of the others straight from the breakdown. If you need a shareable version, the copy-link button preserves your exact inputs so a colleague opens the page with the same calculation already filled in.
What to work out next
Once you have your answer you may also want to work in cylinder volume tank capacity volume formula. These related calculators pick up where this one leaves off:
In short: measure the width and the height, keep them in the same unit, and the tool turns them into a volume you can read in litres, gallons, cubic feet or anything else, with the working shown so you can trust it. If a result ever looks off, re-enter the measurement you are least sure of, or switch to the diameter input and let the tool halve it for you, which catches the most common error before it matters.
Questions people ask
What is the formula for the volume of a cylinder?
V = π r² h — the area of the circular base (π r²) multiplied by the height (h). If you have the diameter instead of the radius, halve it first: r = d ÷ 2.